camera fixes
This commit is contained in:
+275
@@ -0,0 +1,275 @@
|
||||
# Built-in Camera Fix for Intel IPU6 Laptops on Fedora
|
||||
|
||||
*As of 2026-10-29*
|
||||
|
||||
The built-in camera on the Dell XPS 16 (DA16250) works on Fedora 44 after three fixes. Fix 1 moves libcamera's image processing off the NVIDIA GPU. Fix 2 corrects the upside-down sensor in the kernel. Fix 3 lets browsers use PipeWire cameras. Fixes 1 and 3 apply to most laptops with an Intel IPU6 camera; fix 2 depends on the laptop model.
|
||||
|
||||
This guide sits in the `xps16-camera-fix-fedora` repository, next to the files the fixes need:
|
||||
|
||||
```
|
||||
xps16-camera-fix-fedora/
|
||||
├── CAMERA-GUIDE.md this guide
|
||||
├── README.md short summary
|
||||
├── fix-camera.sh starts Claude Code with a prompt that follows this guide
|
||||
├── install.sh builds and installs the patched module (Fix 2)
|
||||
└── ipu-bridge/
|
||||
├── ipu-bridge.c Fedora's 7.2 source plus one entry for the DA16250
|
||||
├── Makefile
|
||||
└── dell-xps16-da16250.patch the 7-line change, for reference
|
||||
```
|
||||
|
||||
## At a glance
|
||||
|
||||
Find your symptom, then go to the section in the last column.
|
||||
|
||||
| Symptom | Cause | Where to look |
|
||||
| --- | --- | --- |
|
||||
| Camera is listed, but the picture is black or frozen | libcamera's GPU image processing uses the NVIDIA driver, which fails on every frame | Fix 1 |
|
||||
| Picture is upside down in every app | Firmware says the sensor is upright, and your kernel doesn't know your model is an exception | Fix 2 |
|
||||
| Brave, Chrome or Chromium finds no camera | The browser opens `/dev/video*` directly, and those nodes only carry raw sensor data | Fix 3 |
|
||||
| Firefox finds no camera | Firefox's PipeWire camera setting is off | Fix 3 |
|
||||
| Jagged, grainy picture in Kamoso | Kamoso always asks for 640×480, a 3× downscale with no smoothing | Fix 3 (use Snapshot) |
|
||||
| Upside down only in COSMIC Camera | Bug in COSMIC Camera 1.3.7: it rotates a second time after libcamera already did | Fix 3 (use Snapshot) |
|
||||
| A Flatpak camera app shows black, but Snapshot works | The app bundles its own libcamera, so the WirePlumber setting doesn't reach it | Fix 1 (Flatpak apps) |
|
||||
| Grainy, muddy picture in a dim room | Exposure and gain are both at maximum | Image quality |
|
||||
| `Device or resource busy` | Another app is using the camera; only one can at a time | Close the other app or browser tab |
|
||||
|
||||
## Does this apply to you
|
||||
|
||||
This guide is for laptops whose camera connects through an Intel IPU6 image processor, not over USB. It was tested on a Dell XPS 16 DA16250 (Core Ultra 9 285H, OmniVision OV02C10 sensor, RTX 5070) with Fedora 44, kernels 7.2.11 and 7.2.13, libcamera 0.7.2, PipeWire 1.6.9 and WirePlumber 0.5.18.
|
||||
|
||||
Run these checks in a terminal, top to bottom.
|
||||
|
||||
1. **Camera type.** A "Multimedia controller … IPU" line means a MIPI camera, so this guide applies. `8086:7d19` is the IPU6 in Meteor Lake and Arrow Lake. No line: you probably have a USB webcam, which works without this guide.
|
||||
|
||||
```
|
||||
lspci -nn | grep -i ipu
|
||||
```
|
||||
|
||||
2. **Kernel drivers.** Both `intel_ipu6` and `ipu_bridge` should be listed.
|
||||
|
||||
```
|
||||
lsmod | grep -E 'intel_ipu6|ipu_bridge'
|
||||
```
|
||||
|
||||
3. **Sensor found.** Look for a sensor name besides the "Intel IPU6 CSI2" lines (ours: `ov02c10 23-0036`). If there are only CSI2 lines, the sensor driver is missing, which this guide doesn't cover.
|
||||
|
||||
```
|
||||
grep . /sys/class/video4linux/v4l-subdev*/name
|
||||
```
|
||||
|
||||
4. **Userspace packages.** All three should be installed.
|
||||
|
||||
```
|
||||
rpm -q libcamera libcamera-ipa pipewire-plugin-libcamera
|
||||
```
|
||||
|
||||
5. **PipeWire sees it.** Under Video → Sources you should see "Built-in Front Camera".
|
||||
|
||||
```
|
||||
wpctl status
|
||||
```
|
||||
|
||||
6. **NVIDIA GPU.** Any output means you will probably need Fix 1.
|
||||
|
||||
```
|
||||
lspci | grep -i nvidia
|
||||
```
|
||||
|
||||
7. **Laptop model.** Fix 2 needs the exact string.
|
||||
|
||||
```
|
||||
cat /sys/class/dmi/id/product_name
|
||||
```
|
||||
|
||||
Lunar Lake laptops (Core Ultra 200V) use a newer IPU7 with a different kernel driver. This guide was not tested on them.
|
||||
|
||||
## How it works
|
||||
|
||||
The camera passes through five layers, and each fix targets one of them.
|
||||
|
||||
| Layer | Component | What it does | Fix |
|
||||
| --- | --- | --- | --- |
|
||||
| Hardware | OV02C10 sensor | Mounted at 180°, but the firmware says 0° | |
|
||||
| Hardware | IPU6 image unit | Receives raw Bayer frames over CSI-2 | |
|
||||
| Kernel | `ipu-bridge` | Reads the firmware tables and reports the sensor rotation | **Fix 2:** add your model |
|
||||
| Kernel | `ov02c10` driver | Exposure, gain, hardware horizontal/vertical flip | |
|
||||
| Kernel | `intel_ipu6_isys` | Provides the `/dev/video*` nodes, with raw Bayer data only | |
|
||||
| libcamera (inside WirePlumber) | Software ISP | Turns raw data into a color picture on the GPU | **Fix 1:** use Intel (Mesa), not NVIDIA |
|
||||
| libcamera (inside WirePlumber) | Exposure, color, orientation | Sets sensor gain and exposure, and turns on the flips for 180° | |
|
||||
| PipeWire | PipeWire + WirePlumber | Offers "Built-in Front Camera" to apps, with the camera portal for Flatpaks | |
|
||||
| Apps | Snapshot, browsers, Kamoso | Ask PipeWire for the camera at some resolution | **Fix 3:** browser PipeWire flag |
|
||||
|
||||
The kernel delivers only raw sensor data. libcamera turns it into a picture, and PipeWire hands that picture to apps. Apps that open `/dev/video*` directly skip libcamera and get only raw data, which is why browsers need the PipeWire flag.
|
||||
|
||||
## Fix 1: black image on laptops with an NVIDIA GPU
|
||||
|
||||
On Intel + NVIDIA laptops, tell WirePlumber to use the Intel GPU's driver (Mesa) for camera processing. This takes one file in your home folder and needs no sudo.
|
||||
|
||||
**Why it breaks.** The IPU6 delivers raw Bayer data, and libcamera's software ISP turns it into a color picture on the GPU through EGL. The system hands out NVIDIA's EGL driver first, and with it every frame fails. Using the Intel GPU also keeps the NVIDIA GPU asleep while the camera is on.
|
||||
|
||||
**Confirm the symptom.** Open the camera in any app first, because these lines only appear after a stream starts:
|
||||
|
||||
```
|
||||
journalctl --user -b -u wireplumber | grep -E "EGL_VENDOR|GL_RENDERER|debayerGPU|FATAL"
|
||||
```
|
||||
|
||||
The broken case looks like this:
|
||||
|
||||
```
|
||||
EGL: EGL_VENDOR: NVIDIA
|
||||
ERROR eGL egl.cpp:134 glFrameBufferTexture2D error 36054
|
||||
ERROR Debayer debayer_egl.cpp:639 debayerGPU failed
|
||||
FATAL default pipeline_handler.cpp:398 assertion "data->queuedRequests_.empty()" failed in stop()
|
||||
```
|
||||
|
||||
**Apply the fix.** Restarting WirePlumber can interrupt audio for a moment.
|
||||
|
||||
```
|
||||
mkdir -p ~/.config/systemd/user/wireplumber.service.d
|
||||
cat > ~/.config/systemd/user/wireplumber.service.d/camera-softisp-mesa.conf <<'EOF'
|
||||
[Service]
|
||||
Environment=__EGL_VENDOR_LIBRARY_FILENAMES=/usr/share/glvnd/egl_vendor.d/50_mesa.json
|
||||
EOF
|
||||
systemctl --user daemon-reload
|
||||
systemctl --user restart wireplumber
|
||||
```
|
||||
|
||||
**Check it worked.** Open the camera again and rerun the `journalctl` command. You should see `EGL_VENDOR: Mesa Project`, a `GL_RENDERER` line naming your Intel GPU, and no `debayerGPU failed`. On the test laptop the stream ran at about 28 frames per second.
|
||||
|
||||
**If the Intel route fails.** Replace the `Environment=` line with `Environment=LIBCAMERA_SOFTISP_MODE=cpu` and restart WirePlumber. The CPU path works, but at small sizes it crops the middle of the image instead of scaling it: at 640×480 you get a zoomed-in view.
|
||||
|
||||
**Flatpak apps that bundle libcamera.** Some camera apps, such as COSMIC Camera, ship their own libcamera and bypass WirePlumber, so they need the same setting. The Mesa file sits at a different path inside the sandbox:
|
||||
|
||||
```
|
||||
flatpak override --user --env=__EGL_VENDOR_LIBRARY_FILENAMES=/usr/lib/x86_64-linux-gnu/GL/glvnd/egl_vendor.d/50_mesa.json <app-id>
|
||||
```
|
||||
|
||||
Undo it with `flatpak override --user --reset <app-id>`. Snapshot and the browsers go through PipeWire and don't need this.
|
||||
|
||||
## Fix 2: upside-down image
|
||||
|
||||
Add your laptop to the kernel's list of upside-down sensors. Mainline Linux already lists the XPS 16 DA16250, but Fedora's 7.2 kernels don't yet. The fix is a patched `ipu-bridge` module that rebuilds itself on every kernel update.
|
||||
|
||||
**Why it breaks.** The laptop firmware (ACPI) tells the kernel the sensor is mounted at 0°, but it is mounted at 180°. The `ipu-bridge` module keeps a list of models whose firmware gets this wrong and reports 180° for them. libcamera then flips the image in the sensor itself, at no cost.
|
||||
|
||||
**Check 1: the rotation the system reports.**
|
||||
|
||||
```
|
||||
ID=$(wpctl status | grep -m1 "Built-in Front Camera" | grep -oE "[0-9]+" | head -1)
|
||||
pw-cli info $ID | grep api.libcamera.rotation
|
||||
```
|
||||
|
||||
`"0"` on an upside-down camera means you need this fix. `"180"` means it is already handled.
|
||||
|
||||
**Check 2: whether your kernel knows your model.**
|
||||
|
||||
```
|
||||
M=$(modinfo -n ipu_bridge)
|
||||
case $M in *.xz) xzcat "$M" ;; *) cat "$M" ;; esac | strings | grep -F "$(cat /sys/class/dmi/id/product_name)"
|
||||
```
|
||||
|
||||
If your model name prints, the kernel already has the fix. If nothing prints, install the patched module.
|
||||
|
||||
**Install it (XPS 16 DA16250, Fedora 7.2 kernels).**
|
||||
|
||||
1. Install the build tools: `sudo dnf install kernel-devel-$(uname -r) gcc make`.
|
||||
2. Check Secure Boot with `mokutil --sb-state` (see below if it is enabled).
|
||||
3. In this folder, run `sudo ./install.sh`, then reboot.
|
||||
4. Repeat Check 1. It should print `"180"`.
|
||||
|
||||
**What install.sh does.**
|
||||
|
||||
- Stops on any model other than the DA16250 (it compares the DMI product name).
|
||||
- If the stock module already has the entry, removes any override for that kernel instead of building.
|
||||
- Builds the module against the running kernel and checks that it was built for that kernel version.
|
||||
- Compares every string in the stock module with the new one. Any difference besides the new entry stops the install, so a newer Fedora module is never replaced with an older copy.
|
||||
- Installs to `/lib/modules/<kernel>/updates/ipu-bridge.ko`, which takes priority over the stock module, and runs `depmod`.
|
||||
- Adds a kernel-install hook that repeats all this for each new kernel, logging to `/var/log/ipu-bridge-da16250.log`. The hook never fails a kernel install. On the test laptop it rebuilt the module by itself when kernel 7.2.13 arrived.
|
||||
|
||||
The kernel will mark itself "tainted" because the module is unsigned and built outside the kernel tree. This is only a label.
|
||||
|
||||
**Secure Boot.** With Secure Boot on, Fedora refuses unsigned modules, and the script does not sign. You would need to sign the module with a key enrolled in MOK, such as the akmods key if you use akmod-nvidia. This was not tested.
|
||||
|
||||
**A different laptop model.** First check whether mainline Linux already lists your model (link in Sources). If not, change two places:
|
||||
|
||||
1. Note your model string (`cat /sys/class/dmi/id/product_name`) and your sensor's ACPI ID from the command below. The test laptop prints `ov02c10 23-0036 OVTI02C1`.
|
||||
2. In `ipu-bridge/ipu-bridge.c`, copy the DA16250 entry in `upside_down_sensor_dmi_ids[]`. Put your model string in `DMI_PRODUCT_NAME` and your sensor ID in `.driver_data`.
|
||||
3. In `install.sh`, set `QUIRK` to your model string.
|
||||
|
||||
```
|
||||
for s in /sys/class/video4linux/v4l-subdev*; do echo "$(cat $s/name) $(cat $s/device/firmware_node/hid 2>/dev/null)"; done
|
||||
```
|
||||
|
||||
The bundled `ipu-bridge.c` matches Fedora's 7.2 kernels. On another kernel series the script stops at the string comparison, and the source needs refreshing from that kernel first.
|
||||
|
||||
**Undo.** Run `sudo ./install.sh --uninstall`, then reboot.
|
||||
|
||||
## Fix 3: apps and browsers
|
||||
|
||||
Only apps that get the camera through PipeWire can use it. Browsers need one setting; for a camera app, use GNOME Snapshot.
|
||||
|
||||
**Browsers.**
|
||||
|
||||
- **Brave, Chrome, Chromium:** open `brave://flags/#enable-webrtc-pipewire-camera` (or `chrome://flags/…`), set "PipeWire Camera support" to Enabled, and relaunch. In Meet or Jitsi, choose "Built-in Front Camera". The desktop asks once whether the browser may use the camera.
|
||||
- **Firefox:** in `about:config`, `media.webrtc.camera.allow-pipewire` must be `true`.
|
||||
|
||||
With the flag on, USB webcams go through PipeWire too. PipeWire passes their frames through unchanged, and a USB webcam may show up twice in the list.
|
||||
|
||||
**Camera apps.** The resolution an app asks for decides the quality, because the image is shrunk from the sensor's 1928×1092 without smoothing.
|
||||
|
||||
| App | Asks for | Result on the test laptop |
|
||||
| --- | --- | --- |
|
||||
| GNOME Snapshot (`org.gnome.Snapshot`) | 1920×1080 | Works, upright, full quality. Recommended. |
|
||||
| Brave with Google Meet | 1280×720 | Works, good quality. |
|
||||
| Kamoso | 640×480, no setting to change it | Upright, but jagged and grainy. Photos are also 640×480. |
|
||||
| COSMIC Camera 1.3.7 | 1920×1080 | Upside down: it rotates again after libcamera already did. It also bundles its own libcamera, so it needs the Flatpak setting from Fix 1. |
|
||||
|
||||
Install Snapshot with `flatpak install --user flathub org.gnome.Snapshot`. To see what an app asked for, open it and run:
|
||||
|
||||
```
|
||||
journalctl --user -b | grep "configuring streams" | tail -3
|
||||
```
|
||||
|
||||
Only one app can use the camera at a time. If an app shows nothing, close any other camera app or video-call tab.
|
||||
|
||||
## Image quality
|
||||
|
||||
Expect a usable but basic picture: grainy and muddy in a dim room. More light on your face helps more than any setting.
|
||||
|
||||
- **Low light.** In the test room, auto-exposure hit both limits: the longest exposure possible at 30 fps, and 15.5× analogue gain. The image was still about half its target brightness. Maximum gain is where the grain comes from.
|
||||
- **Basic processing.** Linux uses libcamera's software ISP, which has no noise reduction, no lens-shading correction and no calibrated color for this sensor. Windows uses Intel's hardware ISP with tuned processing.
|
||||
- **Slow brightness changes.** libcamera 0.7.2 has no exposure model for the OV02C10, so auto-exposure moves in small steps. The picture takes 10 seconds or more to settle after the camera opens.
|
||||
- **Resolution.** Use 1280×720 or higher. At 640×480 the image is shrunk about 3× without smoothing, which makes edges jagged.
|
||||
|
||||
## Let Claude Code do it
|
||||
|
||||
Claude Code can run the checks, read the logs and adapt the files for your model. You only run the sudo step yourself.
|
||||
|
||||
1. Install Claude Code if you don't have it: `curl -fsSL https://claude.ai/install.sh | bash`.
|
||||
2. Run `./fix-camera.sh` from this folder, or double-click it in your file manager. It opens a terminal if needed and starts Claude Code with a prompt that walks through this guide. The prompt is at the top of the script.
|
||||
3. Claude Code asks before it runs commands or edits files. When it hands you a sudo command, run it in a separate terminal, then reboot.
|
||||
|
||||
Some file managers open scripts in a text editor when you double-click them. In that case, right-click the file and choose the option to run or execute it, or start it from a terminal.
|
||||
|
||||
## What gets installed and how to undo it
|
||||
|
||||
Everything is reversible. Fix 1 and Fix 3 stay in your user account; only Fix 2 touches the system.
|
||||
|
||||
| Change | Location | Root | Undo |
|
||||
| --- | --- | --- | --- |
|
||||
| WirePlumber setting (Fix 1) | `~/.config/systemd/user/wireplumber.service.d/camera-softisp-mesa.conf` | No | Delete the file, then `systemctl --user daemon-reload && systemctl --user restart wireplumber` |
|
||||
| Flatpak app setting (Fix 1, only for apps that bundle libcamera) | The app's `flatpak override --user` entry | No | `flatpak override --user --reset <app-id>` |
|
||||
| Patched module (Fix 2) | `/lib/modules/<kernel>/updates/ipu-bridge.ko`, one per kernel | Yes | `sudo ./install.sh --uninstall`, then reboot |
|
||||
| Kernel-install hook (Fix 2) | `/etc/kernel/install.d/90-ipu-bridge-da16250.install` | Yes | Removed by `--uninstall` |
|
||||
| Copy of the script and source the hook uses (Fix 2) | `/usr/local/src/ipu-bridge-da16250/` | Yes | Removed by `--uninstall` |
|
||||
| Hook log (Fix 2) | `/var/log/ipu-bridge-da16250.log` | Yes | Not removed by `--uninstall`; delete it with `sudo rm` |
|
||||
| Browser flag (Fix 3) | The browser's flags page | No | Set the flag back to Default |
|
||||
|
||||
## Sources
|
||||
|
||||
Checked on 29 October 2026.
|
||||
|
||||
- [Mainline ipu-bridge.c](https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/plain/drivers/media/pci/intel/ipu-bridge.c): its upside-down list includes the XPS 16 DA16250. Search it for your own model.
|
||||
- [Stable 7.2.y ipu-bridge.c](https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/plain/drivers/media/pci/intel/ipu-bridge.c?h=linux-7.2.y): the 7.2 series as of 7.2.13, without the DA16250 entry.
|
||||
- [Fedora f44 kernel patch](https://src.fedoraproject.org/rpms/kernel/raw/f44/f/patch-7.2-redhat.patch): Fedora's own `ipu-bridge` changes (it adds the DA14250, not the DA16250). The bundled `ipu-bridge.c` is stable 7.2 plus these changes plus the DA16250 entry.
|
||||
@@ -1,3 +1,39 @@
|
||||
# xps16-camera-fix-fedora
|
||||
# Dell XPS 16 (DA16250) webcam on Fedora
|
||||
|
||||
Fix the built-in camera on Intel IPU6 laptops (Dell XPS 16) on Fedora, with a one-click Claude Code helper
|
||||
Quick start: run `./fix-camera.sh`. It opens Claude Code with a prompt that
|
||||
diagnoses and fixes the camera step by step.
|
||||
|
||||
For the full step-by-step guide (diagnosis, all fixes, other laptop models), see
|
||||
[CAMERA-GUIDE.md](CAMERA-GUIDE.md).
|
||||
|
||||
Camera: OmniVision OV02C10 on the Intel IPU6 (Arrow Lake), driven by the
|
||||
in-kernel `ov02c10` + `intel-ipu6-isys` drivers and libcamera's software ISP,
|
||||
exposed to apps through PipeWire.
|
||||
|
||||
## Fixes
|
||||
|
||||
1. **Black image**: libcamera's GPU debayer failed on NVIDIA's EGL. Fixed by
|
||||
`~/.config/systemd/user/wireplumber.service.d/camera-softisp-mesa.conf`,
|
||||
which makes WirePlumber use Mesa (the Intel iGPU).
|
||||
2. **Upside-down image**: the ACPI tables report 0° rotation for a sensor that
|
||||
is mounted at 180°. `ipu-bridge` has a DMI quirk list for this. The
|
||||
DA16250 entry is in mainline but not in Fedora's 7.2 kernels yet.
|
||||
`ipu-bridge/` is Fedora's 7.2 source plus that one entry
|
||||
(`ipu-bridge/dell-xps16-da16250.patch`).
|
||||
|
||||
```sh
|
||||
sudo ./install.sh # build + install for the running kernel, add kernel-install hook
|
||||
sudo ./install.sh --uninstall
|
||||
```
|
||||
|
||||
The hook (`/etc/kernel/install.d/90-ipu-bridge-da16250.install`) rebuilds the
|
||||
module for each new kernel, logs to `/var/log/ipu-bridge-da16250.log`, and
|
||||
removes the override once a kernel's stock module already has the quirk. It
|
||||
refuses to install if the stock module differs from this source by anything
|
||||
other than the quirk.
|
||||
|
||||
## Apps
|
||||
|
||||
Only PipeWire-aware apps see the camera. In Chromium or Brave, enable
|
||||
`chrome://flags/#enable-webrtc-pipewire-camera` (`brave://flags/...`). In
|
||||
Firefox, `media.webrtc.camera.allow-pipewire` must be `true`.
|
||||
|
||||
Executable
+56
@@ -0,0 +1,56 @@
|
||||
#!/usr/bin/env bash
|
||||
# One-click camera fix: starts Claude Code in this folder with a prompt that
|
||||
# diagnoses and fixes the built-in Intel IPU6 camera using CAMERA-GUIDE.md.
|
||||
# Claude Code asks before it runs commands or edits files, and hands anything
|
||||
# that needs root back to you.
|
||||
#
|
||||
# ./fix-camera.sh from a terminal, or double-click it in a file manager
|
||||
set -euo pipefail
|
||||
|
||||
SELF=$(readlink -f "$0")
|
||||
cd "$(dirname "$SELF")"
|
||||
|
||||
PROMPT='The built-in camera on this Fedora laptop does not work properly. Use CAMERA-GUIDE.md in this folder to diagnose and fix it:
|
||||
|
||||
1. Run the checks in "Does this apply to you" and tell me what you find before changing anything.
|
||||
2. Open the camera with a short PipeWire test capture and read the WirePlumber log. If libcamera picks the NVIDIA EGL driver and logs "debayerGPU failed", apply Fix 1 and confirm that frames arrive.
|
||||
3. Check the rotation PipeWire reports. If the picture is upside down and this kernel'"'"'s ipu-bridge does not list my model, prepare Fix 2 from the files in this folder. Adapt install.sh and ipu-bridge/ipu-bridge.c if this is not a Dell XPS 16 DA16250. Build it, then give me the sudo command to run; do not install anything as root yourself.
|
||||
4. Tell me which browser setting I need and which camera app to use.
|
||||
|
||||
At the end, list every change you made and how to undo each one.'
|
||||
|
||||
spawned=false
|
||||
[ "${1:-}" = --spawned ] && spawned=true
|
||||
|
||||
pause() { if $spawned; then read -rp "Press Enter to close this window. " _ || true; fi; }
|
||||
die() { echo "fix-camera: $*" >&2; pause; exit 1; }
|
||||
|
||||
# Double-clicked in a file manager: no terminal, so reopen in one.
|
||||
if ! [ -t 0 ] || ! [ -t 1 ]; then
|
||||
$spawned && exit 1 # the terminal we opened has no tty either; don't loop
|
||||
if command -v xdg-terminal-exec >/dev/null; then exec xdg-terminal-exec "$SELF" --spawned
|
||||
elif command -v konsole >/dev/null; then exec konsole -e "$SELF" --spawned
|
||||
elif command -v ptyxis >/dev/null; then exec ptyxis -- "$SELF" --spawned
|
||||
elif command -v gnome-terminal >/dev/null; then exec gnome-terminal -- "$SELF" --spawned
|
||||
elif command -v xfce4-terminal >/dev/null; then exec xfce4-terminal -x "$SELF" --spawned
|
||||
elif command -v xterm >/dev/null; then exec xterm -e "$SELF" --spawned
|
||||
fi
|
||||
command -v notify-send >/dev/null && notify-send "fix-camera" "No terminal app found. Run $SELF from a terminal."
|
||||
exit 1
|
||||
fi
|
||||
|
||||
[ -f CAMERA-GUIDE.md ] || die "CAMERA-GUIDE.md is missing; keep this script in the same folder as the guide"
|
||||
command -v claude >/dev/null || die "Claude Code is not installed. Install it with:
|
||||
|
||||
curl -fsSL https://claude.ai/install.sh | bash
|
||||
|
||||
then open a new terminal and run this script again."
|
||||
|
||||
cat <<EOF
|
||||
Starting Claude Code in $PWD.
|
||||
It asks before running commands. When it gives you a sudo command, run that in a
|
||||
separate terminal. Quit Claude Code with /exit when you are done.
|
||||
|
||||
EOF
|
||||
claude "$PROMPT" || true
|
||||
pause
|
||||
Executable
+112
@@ -0,0 +1,112 @@
|
||||
#!/usr/bin/env bash
|
||||
# Install ipu-bridge with the Dell XPS 16 (DA16250) upside-down camera quirk
|
||||
# for Fedora kernels that don't ship it yet, plus a kernel-install hook that
|
||||
# rebuilds it for every newly installed kernel.
|
||||
#
|
||||
# sudo ./install.sh running kernel + hook
|
||||
# sudo ./install.sh --kver KVER one specific kernel (used by the hook)
|
||||
# sudo ./install.sh --uninstall remove all overrides and the hook
|
||||
#
|
||||
# Once a kernel's stock ipu-bridge contains the quirk (it is in mainline),
|
||||
# the override for that kernel is removed instead of rebuilt.
|
||||
set -euo pipefail
|
||||
|
||||
NAME=ipu-bridge-da16250
|
||||
QUIRK='XPS 16 (Dell 16 Premium) DA16250'
|
||||
SHARE=/usr/local/src/$NAME
|
||||
HOOK=/etc/kernel/install.d/90-$NAME.install
|
||||
SELF_DIR=$(dirname "$(readlink -f "$0")")
|
||||
SRC=$SELF_DIR/ipu-bridge
|
||||
WORK=$(mktemp -d)
|
||||
trap 'rm -rf "$WORK"' EXIT
|
||||
|
||||
die() { echo "$NAME: $*" >&2; exit 1; }
|
||||
|
||||
# String literals of a module's .rodata, minus __FILE__ paths, so a signed
|
||||
# distro build and our unsigned one compare equal when the source matches.
|
||||
ro_strings() {
|
||||
local ko sec
|
||||
ko=$(mktemp -p "$WORK") # unique: callers run this in parallel via <(...)
|
||||
case $1 in
|
||||
*.xz) xz -dc "$1" >"$ko" ;;
|
||||
*.zst) zstd -qdc "$1" >"$ko" ;;
|
||||
*) cp "$1" "$ko" ;;
|
||||
esac
|
||||
for sec in $(readelf -SW "$ko" | grep -oE '\.rodata[^ ]*' | sort -u); do
|
||||
objcopy -O binary --only-section="$sec" "$ko" /dev/stdout 2>/dev/null
|
||||
done | strings -n4 | grep -vE '\.[ch]$' | sort -u
|
||||
}
|
||||
|
||||
remove_for() {
|
||||
if [ -e "/lib/modules/$1/updates/ipu-bridge.ko" ]; then
|
||||
rm -f "/lib/modules/$1/updates/ipu-bridge.ko"
|
||||
depmod -a "$1"
|
||||
echo "$1: removed patched ipu-bridge"
|
||||
fi
|
||||
}
|
||||
|
||||
install_for() {
|
||||
local kver=$1 stock ko=$WORK/build/ipu-bridge.ko
|
||||
stock=$(ls "/lib/modules/$kver/kernel/drivers/media/pci/intel/"ipu-bridge.ko* 2>/dev/null | head -1)
|
||||
[ -n "$stock" ] || die "$kver: no stock ipu-bridge module"
|
||||
if ro_strings "$stock" | grep -xF "$QUIRK" >/dev/null; then
|
||||
echo "$kver: stock ipu-bridge already has the quirk, no override needed"
|
||||
remove_for "$kver"
|
||||
return
|
||||
fi
|
||||
[ -e "/lib/modules/$kver/build/Makefile" ] || die "$kver: kernel-devel-$kver is not installed"
|
||||
|
||||
rm -rf "$WORK/build" && mkdir "$WORK/build"
|
||||
cp "$SRC/ipu-bridge.c" "$SRC/Makefile" "$WORK/build/"
|
||||
make -s -C "/lib/modules/$kver/build" M="$WORK/build" modules >"$WORK/make.log" 2>&1 ||
|
||||
{ cat "$WORK/make.log" >&2; die "$kver: build failed"; }
|
||||
strip --strip-debug "$ko"
|
||||
[ "$(modinfo -F vermagic "$ko" | cut -d' ' -f1)" = "$kver" ] || die "$kver: vermagic mismatch"
|
||||
|
||||
# Never replace a newer distro module with our older copy of the source.
|
||||
diff <(ro_strings "$stock") <(ro_strings "$ko" | grep -vxF "$QUIRK") >/dev/null ||
|
||||
die "$kver: stock ipu-bridge differs from ipu-bridge/ipu-bridge.c beyond the quirk; refresh the source"
|
||||
|
||||
install -Dm644 "$ko" "/lib/modules/$kver/updates/ipu-bridge.ko"
|
||||
depmod -a "$kver"
|
||||
echo "$kver: installed patched ipu-bridge"
|
||||
}
|
||||
|
||||
[ "$(id -u)" = 0 ] || die "must run as root"
|
||||
[ "$(cat /sys/class/dmi/id/product_name)" = "$QUIRK" ] || die "this is not a $QUIRK"
|
||||
|
||||
case ${1:-} in
|
||||
--uninstall)
|
||||
for m in /lib/modules/*/updates/ipu-bridge.ko; do
|
||||
[ -e "$m" ] && remove_for "$(basename "$(dirname "$(dirname "$m")")")"
|
||||
done
|
||||
rm -f "$HOOK"
|
||||
rm -rf "$SHARE"
|
||||
echo "Uninstalled. Reboot to go back to the stock module."
|
||||
;;
|
||||
--kver)
|
||||
install_for "${2:?--kver needs a kernel version}"
|
||||
;;
|
||||
"")
|
||||
install_for "$(uname -r)"
|
||||
# Root-owned copy for the hook, so it never runs code from a user's home.
|
||||
install -d "$SHARE/ipu-bridge"
|
||||
install -m644 "$SRC/ipu-bridge.c" "$SRC/Makefile" "$SHARE/ipu-bridge/"
|
||||
install -m755 "$SELF_DIR/install.sh" "$SHARE/install.sh"
|
||||
cat >"$HOOK" <<EOF
|
||||
#!/bin/sh
|
||||
# Installed by $NAME: rebuild the patched ipu-bridge for new kernels.
|
||||
# Never fails the kernel installation; see /var/log/$NAME.log.
|
||||
[ "\$1" = add ] || exit 0
|
||||
$SHARE/install.sh --kver "\$2" >>/var/log/$NAME.log 2>&1 ||
|
||||
echo "$NAME: failed for \$2, see /var/log/$NAME.log" >&2
|
||||
exit 0
|
||||
EOF
|
||||
chmod 755 "$HOOK"
|
||||
echo "Hook installed: $HOOK"
|
||||
echo "Reboot to load the patched module."
|
||||
;;
|
||||
*)
|
||||
die "unknown argument: $1"
|
||||
;;
|
||||
esac
|
||||
@@ -0,0 +1 @@
|
||||
obj-m := ipu-bridge.o
|
||||
@@ -0,0 +1,16 @@
|
||||
--- a/drivers/media/pci/intel/ipu-bridge.c
|
||||
+++ b/drivers/media/pci/intel/ipu-bridge.c
|
||||
@@ -143,6 +143,13 @@
|
||||
},
|
||||
.driver_data = "OVTI02C1",
|
||||
},
|
||||
+ {
|
||||
+ .matches = {
|
||||
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
|
||||
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "XPS 16 (Dell 16 Premium) DA16250"),
|
||||
+ },
|
||||
+ .driver_data = "OVTI02C1",
|
||||
+ },
|
||||
/*
|
||||
* The first four characters of DMI_BOARD_NAME identify the Lenovo
|
||||
* machine type/model. For example, a DMI_BOARD_NAME starting with
|
||||
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user